Product Details
Light Control
Light Filtering
Measure & Install
How To Measure
How To Install
Professional
Measuring & Installation
Standard Lift Specifications
Width:
12" - 96"
Height:
12" - 120"
Minimum Mounting Depth:
0.75"
Minimum Flush Mounting Depth:
3.25"
Headrail Dimension:
2" x 2.25"
2 on 1 Headrail Specifications
Because large blinds are difficult to raise and lower, the 2 on 1 headrail option allows two smaller blinds to share a common headrail and valance. This gives the overall blinds a cleaner appearance.
Decorative Tapes
Decorative Tapes provide additional light control with a touch of class. Instead of the standard rope lift cords, decorative tapes are fabric lift cords that come in various colors.
Motorized Tilt
Tilt the window blind slats using a remote control. Motorized blinds operate the tilt only. No Lift. Hand held remote included.
Rounded Corners
Each wood slat is cut with rounded corners for a softer look to the window blinds.
Free Features
![Lift Cord](images/products/features/controls.jpg?v=1.1)
Lift Cord
The lift cord is used to raise and lower the blinds. This option allows you to select the position of the cord on the blinds.
![Lift Cord](images/products/features/tiltcord.jpg)
Tilt Control
The tilt control is used to open and close the blind slats. This option allows you to select the position of the tilt control on the blinds.
![Tilt Control](images/products/features/1001.jpg?v=1.1)
Tilt Control
The tilter control is used to open and shut the blinds. Tilter control options are either a traditional wand or a continuous loop cord with tensioner device.
![Cornice Style Valance](images/products/features/1010.jpg?v=1.1)
Cornice Style Valance
Valance returns create a "cornice" style valance. Inside mount valance returns are shorter than outside mount returns and extend about 1/2 to 1 inch past the window frame on each side. The cornice valance offer a more elegant look than no returns. A valance on an inside mount blind will be mounted outside the window frame while the blinds remain inside the window frame. Not recommended with windows that have moulding.
Note: Blind must be mount to the front of the window frame opening.
Note: Blind must be mount to the front of the window frame opening.